Solaris Pre-cut 3.2mm Splinting Material Features
Resistance to Stretch –
- Moderate to maximum resistance to stretch
- Can be stretched and pulled around curves without thinning or growing out of control
- Able to position limb and aggressively hold and stretch material to form splints
Drape –
- Moderate drape
- Takes on the contours of the hand for an intimate fit using only moderate pressure
- Thinner material follows the curves of the hand and fingers with minimal handling
Memory –
- Moderate memory will spring back slightly while warm
Why to use Solaris Pre-cut Splinting Material?
Rigidity –
- Maximum rigidity
- Splints will hold their shape against the pull of strong dynamic components and against hypertonicity
Exquisite Bonding –
- Uncoated Solaris provides a slightly sticky surface when warm to keep material in place for an intimate fit
- A permanent bond is achieved by applying dry heat and pinching it together firmly. No solvent is needed
Surface Finish –
- Resists fingerprinting
- Fingerprints and other marks disappear or can be smoothed away by rubbing the surface gently while the splint is warm
- Leaves sealed, smooth edges when cut warm
Work Time –
- Allows four to six minutes to form and harden after softening in 160° F (71° C) water
When to apply Solaris 3.2mm Pre-cut Splinting Material?
- Ideal for abnormal tone conditions or joint contractures when patients are unable to cooperate
- Its unique qualities make Solaris perfect for upper and lower extremity positioning splints and pediatric, non-weight bearing AFOs
- The combined drape with controlled, resistive stretch of Solaris allows aggressive, firm handling to form a rigid splint that conforms perfectly to the body
