How to use Medline Drainage Bag?
- Wash hands with soap and water.
- Thereafter remove the protective cap from the Medline Drainage Bag and check the drainage spout to make sure it is closed.
- Using an alcohol-saturated pad or material, clean the connector end of the tubing and the catheter end. Attach the catheter to the drain bag tubing connector.
- Discard any packaging, alcohol pads, etc.
- The width of the bag is 330±10mm and the length is 210±10mm from the top of the hanger to the bottom of the bag
Emptying The Drainage Bag:
Empty your bag frequently, not allowing it to become more than approximately half full. Remember, as it fills up, it gets heavier and may tug on the catheter or become difficult to manage.
- Wash hands with soap and water.
- Keep the Drainage Bag below your bladder as you empty it.
- Hold the bag over the toilet or container. Open the drainage spout and empty the urine from the bag.
- Do not let the bag touch the rim of the toilet or container. With an alcohol-saturated pad or material, clean the drainage spout and close it tightly.
- Wash your hands with soap and water.
Medline Low-Bed Drainage Bag Instruction Manual
