Breg Vectra Premium Walker Boot Liner Kit Features
- Kit includes:
– Liner
– Calf and foot straps
– Two foam ankle pad - Common Examples of Use:
- – Soft tissue injuries of the lower leg
– Moderate to severe ankle sprains
– Syndesmosis (high ankle) sprain
– Forefoot/midfoot/hindfoot pain and injuries
– Stable foot and/or ankle fractures
– Post ORIF and surgical stabilization after tendon/ligament repairs
– Metatarsal fracture
– Other acute or post-operative use (i.e. bunionectomy) - Instruction Manual
More On Breg Vectra Premium Walker Boot
- Fitting Instructions:
– Apply liner to leg - With patient seated, leg(s) bent and feet off floor, position tongue pad as needed for maximum comfort, close liner snugly
– Slide walker onto leg over the liner straight up directly under foot
– Fasten straps
Start with straps 1 and 2 closest to the toes (Straps may be trimmed to desired length)
– Position walker with uprights centered over the malleoli (ankle bones)
Ensure heel is positioned at the rear of the Walker
– Remove quick-pulls from the uprights and discard
Attach uprights to the liner
Press firmly
– Fasten straps
Affix straps 3 through 5 to the outside of the uprights by alternating the buckle placement
Then fasten straps 3 through 5 - Use and care:
- – After initial application, the Vectra may be removed and reapplied without removing liner from boot- Hand wash the liner and straps with mild soap, air dry
– Do not place liner or straps into a mechanical dryer
