Everyway4All CA190 Electric Tilt Therapy Table Features
- All 4 corners of the CA190 Tiltima are supported by a 5″ inch castor with Swivel Lock and Brake
- The Frame Construction is made with Steel Tubes of (a) 6 * 3cm and (b) 7 * 3cm Dimensions and by the thickness of 2mm
- For absolute safety requirement, the CA190 Tiltima is equipped with a “1-Pull Emergency Handle” at the back of table
- When in an emergency situation where no utility power is available, the emergency handle can be pulled to allow the table top to be moved back from vertical to horizontal position and the patient can then be unstrapped and transferred to normal patient’s bed.
- In any given case of loss of utility power, just pull on the Red Emergency Handle at the back of table to disengage the Motorized Actuator (otherwise locked) to allow the patient to be unstrapped and lifted off the table.
- Controlled by a (4 Buttons) Hand Control
- 1 Motorized Actuator for Hi/Lo Adjustments (55cm to 90cm)
- 1 Motorized Actuator for Tilt Adjustments (0º to 90º)
- 100 to 240VAC (Universal Voltage)
- Plug Type: US Plug
CA190 Tiltima User Manual
What to buy with Everyway4All CA190 Tiltima 1-Section Table
- Skil-Care Bed Support 30-Degree Bolster System
- Skil-Care Pillow Prop
- OPTP Original McKenzie Cervical Roll
How to clean Everyway4All Tiltima Electric Tilt Table?
- Prior to carrying out any cleaning process, disconnect the power cord from the main wall socket.
- Move the table to a suitable area prior to cleaning.
- Use only neutral detergent (pH 7) and dilute with warm water.
- Use alcohol wipes for cleaning hand or foot control.
- Wipe the table dry prior to use.
- Wash your hands thoroughly after cleaning to avoid irritation.
- For decontaminating the table use a diluted solution of Hypochlorite with cold water (mix at 10,000ppm or parts per million).
How to use Everyway4All CA190 Tiltima Tilt Table?
Safety Instructions
- Do not use the table in “Wet Rooms” – Hydrotherapy Rooms.
- Keep the table away from direct heat and/or fire.
Warnings
- Please make certain that Electric Couches /Tables are not used in the presence of flammable gases such as anaesthetic agent.
- Do not sit on the edge of the Head or Foot Section of a couch or table as possible damages to the (1) Gas Struts and/or (2) Gas Strut Handle Bar may occur. The standard Load of a couch or table is rated at which the loading weight is distributed evenly across the working surface but not on a specific area or side of the tabletop.
- It is hazardous to exceed the rated maximum load of a couch or table.
- The operation Electric couch or table requires the Power Cord to be securely plugged into the wall utility power. When the Power Cord is unplugged, it does not operate unless the couch or table is equipped with a backup battery.
- Use only the original accessories that are manufactured by Everyway Medical Inst. Co., Ltd. for a table or couch.
- Children must be refrained from using any tables or couches by means of operating a hand or foot control nor Elevating Bars.
Cautions
- Before allowing a patient to lay on the couch or table, please ensure that the Leveling Foot at each corner is Leveled and resting on the floor securely after the castors are retracted. If not, please adjust the leveling foot accordingly to stabilize the table.
- Check any trapped power cords or cables underneath the couch or table while moving the table.
- Keep any person’s limbs away from all moving parts of a couch or table especially when the table is being moved from one place to another
- When applying electrotherapy to a patient, please keep his or her body away from any contact with metal parts of the couch or table.
- Please familiarize yourself with the operation of all various controls of actuator and gas struts to avoid inadvertent actuation of table sections.
