0
goodmedicalzoneus.com
0
Home » Shop » hot sale » Drive Model 180 Nebulizer

Drive Model 180 Nebulizer

Original price was: $108.24.Current price is: $63.62.

Sale!
SKU: 46229 Category:
Share

Features of Drive 180 Nebulizer

  • Specially suited for a solution with oil or glycerin base medications
  • All types of oil or water solutions can be used that are compatible with rhodium and nickel plating
  • Vented nasal guard restricts development of undesirable pressure, and small and large plain guards are provided for inflation purposes
  • Used by E.N.T doctors, research laboratories, veterinarians

Note: Prescription can be emailed or faxed to 1.203.616.2851. To email please: Click Here

How to use Drive Model 180 Nebulizer?

  • Use only solutions with an oil or glycerin base. For best results, fill bottle not more than one-quarter full.
  • Nebulizer can be operated with either compressed air or a hand bulb. If hand bulb is used, grasp the bulb firmly using the fingers against the palm of the hand, rather than two or three fingers against the thumb.
  • For a dry vapor, turn the little metal table inside the bottle to a horizontal position. For a moist vapor, turn it to a perpendicular position.
  • Nebulizer is equipped with both a vented and a plain nasal guard. The nasal guard with ventilating grooves prevents any undesirable excess of air pressure in the nasal cavities. This extra low-pressure feature ensures against any possible harm to delicate membranes.
  • The plain guard is for inflation purposes. In attaching either nasal guard to the nebulizer, give it a slight twist to make it fit tightly.

    • How to clean Drive 180 Nebulizer?

    • Unscrew and remove spray unit from the bottle.
    • Unscrew and remove glass tube with its metal ferrule.
    • Wipe the nozzle point clean. If this does not remove obstruction, run a fine wire through the glass tube and metal ferrule.
    • Replace glass tube and screw metal part to bottle.

    How to sterilize Drive 180 Nebulizer?

    • Remove plastic nasal guard.
    • Disassemble the atomizer by rotating the cap in a counterclockwise direction.
    • The spray tube assembly can be removed from the cap by rotating it in a counterclockwise direction.
    • Boil metal parts and plastic guard.