Home » Shop » hot sale » Drive Competitive Edge Line Folding Bariatric Steel Commode

Drive Competitive Edge Line Folding Bariatric Steel Commode

Original price was: $63.07.Current price is: $48.95.

Sale!
SKU: 37295 Category:

Features

  • Drive Competitive Edge Line Folding Bariatric Steel Commode has a weight capacity of 350lb
  • Tool free assembly
  • No installation required
  • Material: Steel
  • Color: Grey
    Note: This item cannot be returned or exchanged due to hygienic reasons

More Information

  • Assembly Instructions:
    – Remove commode from packaging.
    – Unfold commode and stand upright.
    – Adjust the sides of commode frame perpendicular to the back frame.
    – Attach front cross brace by depressing brass push pins and sliding brace into side frame socket.
    – Attach on both sides. Be sure brass push pins snap through holes.
    – Attach back brace by depressing brass push pins and sliding back brace into a receptacle located on the back of cross brace. Be sure brass push pins snap through holes.
    – Lower commode bucket into the bracket and attach lid onto the back of the frame.
    – To unfold, depress push pins on the back support and remove.
    – Depress push pins on front frame and slide frame from the side.
  • Adjusting Leg Height:
    – Before use, adjust the height of each leg to your specific needs, making sure all legs are at the same height.
    – When desired height is reached, lock legs into place by aligning buttons into proper holes.
    – To be sure legs are locked into place by pushing down on or by pulling legs.
  • Precautions:
    – Toilet seat must be in down position before use. Failure to do so may result in breakage of the commode and possible injury.
    – Do NOT install commode without first reading and understanding this assembly and instruction sheet.
    – If you can not understand these instructions, contact a healthcare dealer or technical professional before attempting to install.
    – Otherwise, injury or damage may occur.
    – Inspect all parts for shipping damage before assembly. If there is shipping damage – DO NOT USE.
    – Make certain that the height adjusting snap buttons fully protrude through the same respective hole of each leg extension.
    – This will ensure that the leg extensions are securely locked in position and an even height is achieved.
    – Ensure ALL screws, nuts and/or bolts are tightened.
    – Check the rubber tips on the leg extensions for rips, wear or if they are missing.
    – Immediately replace any or all if any of these imperfections exist.
    – All four leg extensions with rubber tips must touch the floor simultaneously at all times.
    – Users with limited physical strength should be supervised or assisted while using the commode.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov