Breg Vectra Premium Walker Boot Features:
- Lightweight walker boot with a very low profile footbed height
- Dual-Axis rocker bottom encourages a more natural gait
- Breathable Airmesh liner with malleable aluminum uprights and removable heel clip
- Wide footbed accommodates swelling and post-op bandages
- Common Examples of Use:
-Soft tissue injuries of the lower leg - – Moderate to severe ankle sprains
– Syndesmosis (high ankle) sprain
– Forefoot/midfoot/hindfoot pain and injuries
– Stable foot and/or ankle fractures
– Post-ORIF and surgical stabilization after tendon/ligament repairs
– Metatarsal fracture
– Other acute or post-operative use (i.e. bunionectomy) - Instruction Manual
More On Breg Vectra Premium Walker Boot
- Fitting Instructions:
– Apply liner to leg- With patient seated, leg(s) bent and feet off floor, position tongue pad as needed for maximum comfort, close liner snugly
– Slide walker onto leg over the liner straight up directly underfoot
– Fasten straps- Start with straps 1 and 2 closest to the toes (Straps may be trimmed to the desired length)
– Position walker with uprights centered over the malleoli (ankle bones)
- Ensure heel is positioned at the rear of the Walker
– Remove quick-pulls from the uprights and discard
- Attach uprights to the liner
- Press firmly
– Fasten straps
- Affix straps 3 through 5 to the outside of the uprights by alternating the buckle placement
- Then fasten straps 3 through 5
- Use And Care:
– After initial application, the Vectra may be removed and reapplied without removing liner from boot - – Hand wash the liner and straps with mild soap, air dry
– Do not place liner or straps into a mechanical dryer
