Breg Genesis Full Shell Walker Features
- Built-in air pump
- This pneumatic walker comes with a durable hard shell design
- Narrow heel width
- Trim-able shell
- Dynamic air stride technology
- Dual air chambers
- Scalloped no-slip tread
What to buy with Genesis Full Shell Walker
- Breg Lace Up Ankle Brace
- Breg Knee Support
- Breg Silicone Heel Cups
Breg Genesis Orthopedic Full Shell Walking Boot Instructions
- Loosen all of the straps
- Detach the plastic anterior plate
- Open the foam boot cuffs so that it is easy to insert the foot and calf inside
- Place the foot into the foam boot so that the heel sits securely against the back of the boot
- Make sure the foot is flat on the innersole
- Starting with the foot section of the foam boot, fit the boot by overlapping the cuffs
- One side has a hook closure that will attach to the opposite side
- First, pull the non-hook side of the cuff over the foot, then pull the hook side over and secure when the desired fit is achieved
- Repeat the process for the calf section of the foam boot
- Re-attach the plastic anterior shell
- There are hook and loop spots on the back to adhere the shell to the foam boot
- Place the shell so the top is aligned with the top of the foam boot
- Secure the strap on the top of the foot section
- Insert the strap end through the black D-ring and pull to the desired tension on the strap
- Next, secure the bottom calf strap
- Insert the strap end through the black D-ring and pull to the desired tension on the strap
- Repeat the process for the top calf strap
- On the four-strap configuration, secure the bottom calf strap
- Repeat the process for the middle and top calf straps
- Push the air pump to inflate the air bladder to the desired patient comfort and support
- The fitting process is complete
- To deflate the air bladders, press firmly on the release valve until the air has been released
User Manuals
- Genesis Full Shell Walker User Manual
- Breg Genesis Walker Instructions for Use
- Genesis Toe Cover Instructions for Use
