Bemis Hi-Flow Rigid Suction Canister Kit

Hi-Flow Rigid Suction Canister Features

• This suction canister features pour spout, vacuum and patient ports
• Stepped patient port for direct tubing access
• Self-sealing lid provides leak-free seal
• Large, easy to read graduations
• Frosted panel provides writing area when needed
• Not made with natural rubber latex
• Dimensions:
  • Bottom Diameter: 4
  • Top Diameter: 6-1/8
  • Height: 7-1/2

Bemis Rigid Suction Canister User Manual

What to buy with Bemis Hi-Flow Rigid Suction Kit

• Devilbiss Non Sterile Bacteria Filters For Vacu Aide Quiet Suction Unit
• Neotech Little Sucker Oral-Nasal Suction Devices
• Cardinal Health Five in One Tubing Connector

How to use Hi-Flow Canister Kit?

1. Gently shake lid to verify shut-off mechanism moves freely.
2. Place lid on hospital suction canister and press firmly around entire perimeter.
3. Take right angle connectors (elbows) out of bags found in lid packages and apply tightly to patient and vacuum ports.
   Note: On Hi-Flow models only, the patient tube can be placed directly on patient port without an elbow if desired.
4. Apply pour spout cap firmly over pour spout and apply tandem port cap tightly over tandem port if not being used.
5. Attach patient tube to patient port and vacuum tube to vacuum port. Be sure tubing fits snugly.
6. Check all caps and connections for proper seal. Test the assembly for vacuum leaks by turning on vacuum source and occluding the patient tubing with finger or thumb.
7. To eliminate fluid contamination in vacuum line, make sure vacuum line is attached to vacuum port.

Disposal:

• Turn off vacuum source and disconnect all tubing.
• Seal vacuum and patient ports with attached port caps.
• Remove canister from bracket and transport to disposal area. Do not lift canister by lid. The weight of the contents may cause the lid to separate from the canister.
• Dispose of according to hospital policy.