Features of Provox Reusable Brush
- Atos Medical Provox Non-Sterile Reusable Brush can also be bent for individual adaptation
- Rounded tip to protect against accidental injury
- Safety wings to prevent unlikely inhalation of the Provox Brush
- Short handle for easier handling
- Available in two sizes
– Provox Brush Standard is for use with all Provox voice prostheses 4.5-10 mm
– Provox Brush XL is for use with all Provox voice prostheses 12-18 mm
What to buy with Provox Non Sterile Brush
- Atos Medical Provox HME Cap
- Atos Medical Provox Vega Plug
- Atos Medical Provox ActiValve Voice Prosthesis
How to Use Atos Non-Serile Brush?
- Inspect the brush before each use to make sure it is not broken or worn out, and ensure it is clean.
- Wet the brush with clean water.
- Insert the brush into the middle of the voice prosthesis and move the brush back and forth a few times.
- Pull it back if you feel any resistance.
- Twist the brush around a few times while moving it back and forth.
- Remove the brush and clean it thoroughly.
- Dry the brush after cleaning.
Tips on using Provox Brush
- Brush both morning and night and after each meal.
- Make sure the Provox Brush is clean at all times.
- Clean and rinse before and after use, and disinfect daily.
- The blue brush shaft can be bent for easier access to the voice prosthesis.
- Do not bend the bristle head.
- If mucus or debris is stuck inside the voice prosthesis, try brushing with warm water.
- Store the Provox Brush in a clean and dry space. Do not keep it in your pocket.
- Do not soak it overnight.
- Ensure you have a good supply of Provox Brush available, in case you need to replace a dirty or damaged brush with a new one.
- Replace the Provox Brush at least every 4 weeks or more often if it is dirty or damaged.
- When using the Provox Flush as a part of your cleaning routine, brush first and then flush.
Provox Brush Cleaning Tips
- Clean and rinse the Provox Brush before and after use.
- Wipe the brush to remove any visible residue.
- Clean in warm soapy water (min. 50°C and 2 drops of dishwashing liquid up to 250ml) for 15 min.
- Rinse the brush in clean water, cleaning the bristles.
- Place the brush with the handle down in a cup to dry.
- Disinfect the Provox Brush at least once per day. Use one of the following methods:
– Ethanol 70% for 10 minutes
– Isopropyl alcohol 70% for 10 minutes
– Hydrogen peroxide 3% for 60 minutes
Provox Brush User Manual
